National Transportation Safety Board

Subterms

    More stories

    • 88 Shares149 Views

      in Elections

      Boeing Subject of Criminal Inquiry by DOJ

      by

      The investigation is tied to an incident on an Alaska Airlines flight in early January. Boeing also told a Senate panel that it cannot find a record of the work done on the Alaska plane.The Justice Department has begun a criminal investigation into Boeing after a panel on one of the company’s planes blew out on an Alaska Airlines flight in early January, a person familiar with the matter said.The airline said it was cooperating with the inquiry. “In an event like this, it’s normal for the D.O.J. to be conducting an investigation,” Alaska Airlines said in a statement. “We are fully cooperating and do not believe we are a target of the investigation.” Boeing had no comment.On Jan. 5, a panel on a Boeing 737 Max 9 jet operated by Alaska Airlines blew out in midair, exposing passengers to the outside air thousands of feet above ground. There were no serious injuries resulting from that incident, but it could have been catastrophic had the panel blown out minutes later, at a higher altitude.The panel is known as a “door plug” and is used to cover a gap left by an unneeded exit door. A preliminary investigation by the National Transportation Safety Board suggested that the plane may have left Boeing’s factory without the plug bolted down.The criminal investigation was first reported by The Wall Street Journal.The Justice Department has previously said it was reviewing a 2021 settlement of a federal criminal charge against the company, which stemmed from two fatal crashes aboard its 737 Max 8 plane. Under that agreement, Boeing committed to paying more than $2.5 billion, most of it in the form of compensation to its customers. The Justice Department agreed to drop the charge accusing Boeing of defrauding the Federal Aviation Administration by withholding information relevant to its approval of the Max. It was not immediately clear if the criminal investigation was related to the review of the 2021 settlement or a separate inquiry.The deal was criticized for being too lenient on Boeing and for having been reached without consulting the families of the 346 people killed in those crashes. The first occurred in Indonesia in late 2018. After the second in Ethiopia in early 2019, the Max was banned from flying globally for 20 months. The plane resumed service in late 2020 and has since been used in several million flights, mostly without incident — until the Alaska Airlines flight on Jan. 5.We are having trouble retrieving the article content.Please enable JavaScript in your browser settings.Thank you for your patience while we verify access. If you are in Reader mode please exit and log into your Times account, or subscribe for all of The Times.Thank you for your patience while we verify access.Already a subscriber? Log in.Want all of The Times? Subscribe. More

    • 113 Shares99 Views

      in Elections

      Boeing Suspends Financial Outlook as It Focuses on Safety

      by

      The manufacturer is under pressure to improve quality control after a panel blew off a 737 Max 9 plane during an Alaska Airlines flight this month.Boeing on Wednesday said that it would not provide a full-year financial forecast, the clearest indication yet that the company is trying to assure customers that it is prioritizing safety amid growing concerns about its popular 737 Max jets.Even as it announced its quarterly earnings, the company chose to focus instead on discussing quality control. Boeing is trying to stem the fallout from an incident less than four weeks ago in which a hole blew open on an Alaska Airlines 737 Max 9 plane shortly after takeoff.“While we often use this time of year to share or update our financial and operational objectives, now is not the time for that,” Boeing’s chief executive, Dave Calhoun, wrote in a message to employees. “We will simply focus on every next airplane while doing everything possible to support our customers, follow the lead of our regulator and ensure the highest standard of safety and quality in all that we do.”With the Jan. 5 incident still under investigation by federal officials, Boeing executives had been grappling with how much to emphasize its efforts to improve safety while also reassuring shareholders about its financial performance. Quality concerns have taken on new urgency after news accounts, including a report in The New York Times, that Boeing workers opened and reinstalled the panel that blew off the plane, known as a door plug.The incident terrified passengers and forced the pilots to make an emergency landing in Portland, Ore. It renewed concerns among some aviation experts that Boeing has long focused too much on increasing profits and enriching shareholders through buybacks and dividends and not enough on engineering and safety. Experts raised similar concerns after two accidents on the 737 Max 8 killed nearly 350 people in 2018 and 2019.The effects of the incident on Boeing’s financial performance are not yet known: The results it announced on Wednesday were for the three months that ended Dec. 31.In its earnings release on Wednesday, the company said it was producing 737 Max jets at a rate of 38 per month at the end of the year. It had hoped to increase that rate to 42 per month this year.But the Federal Aviation Administration said last week that it was limiting Boeing’s ability to increase production of all 737 Max planes, including approving any additional assembly lines, until the company proved that it had resolved its quality control issues.The company said Wednesday that it lost $30 million in the fourth quarter, an improvement from a loss of $663 million in the same period a year earlier. Revenue rose to $22 billion, from about $20 billion a year earlier.The National Transportation Safety Board is expected in the coming days to release a preliminary report on the Alaska Airlines incident. More

    • 138 Shares99 Views

      in Elections

      Boeing Reinstalled Panel That Later Blew Out of 737 Max Jet

      by

      Employees at its Washington State factory are said to have removed the door plug for further work before the plane was delivered to Alaska Airlines.Nearly three weeks after a hole blew open on a Boeing 737 Max 9 during an Alaska Airlines flight, terrifying passengers, new details about the jet’s production are intensifying scrutiny of Boeing’s quality-control practices.About a month before the Max 9 was delivered to Alaska Airlines in October, workers at Boeing’s factory in Renton, Wash., opened and later reinstalled the panel that would blow off the plane’s body, according to a person familiar with the matter.The employees opened the panel, known as a door plug, because work needed to be done to its rivets — which are often used to join and secure parts on planes — said the person, who asked for anonymity because the person isn’t authorized to speak publicly while the National Transportation Safety Board conducts an investigation.The request to open the plug came from employees of Spirit AeroSystems, a supplier that makes the body for the 737 Max in Wichita, Kan. After Boeing employees complied, Spirit employees who are based at Boeing’s Renton factory repaired the rivets. Boeing employees then reinstalled the door.An internal system that tracks maintenance work at the facility, which assembles 737s, shows the request for maintenance but does not contain information about whether the door plug was inspected after it was replaced, the person said.The details could begin to answer a crucial question about why the door plug detached from Flight 1282 at 16,000 feet, forcing the pilots to make an emergency landing at Portland International Airport in Oregon minutes after taking off on Jan. 5. The door plug is placed where an emergency exit door would be if a jet had more seats. To stay in place, the plug relies primarily on a pair of bolts at the top and another pair at the bottom, as well as metal pins and pads on the sides.We are having trouble retrieving the article content.Please enable JavaScript in your browser settings.Thank you for your patience while we verify access. If you are in Reader mode please exit and log into your Times account, or subscribe for all of The Times.Thank you for your patience while we verify access.Already a subscriber?  More

    • 138 Shares119 Views

      in Elections

      How Did a Boeing Jet End Up With a Big Hole?

      by

      As Alaska Airlines Flight 1282 made its ascent on Jan. 5, few, if any, passengers knew that a panel called a “door plug” — hidden behind the interior surface of the cabin at both window seats in Row 26 — was all that stood between them and the cold evening sky. Nor did they know […] More